Description
Pure Cut – Fast Cutting Compound for Professional Results
No Fillers. Just Cut.
Meet your new go-to for rapid paint correction—Pure Cut. Engineered for professional detailers and enthusiasts, this high-performance compound utilizes advanced diminishing aluminum oxide abrasives to effortlessly remove severe defects, oxidation, and P1500 sanding marks on all paint types. Its water-based, body-shop-safe formula offers minimal dusting and easy wipe-off, delivering consistently refined results with exceptional clarity and minimal hazing, whether using rotary or dual-action polishers.
Why Choose Pure Cut?
-
Rapid Defect Removal: Eliminates P1500 sanding marks, oxidation, and severe paint defects with ease.
-
Precision Polish Technology (PPT™) – Utilizes triple-filtered, ultra-fine diminishing abrasives to remove moderate to severe defects while refining to a crystal-clear, low haze finish.
-
Low Dust, Easy Wipe-Off: Water-based, body-shop safe formula for clean, efficient correction.
-
Versatile & Filler-Free: Works with DA or rotary polishers and contains no fillers or silicones.
Cut / Finish & Pairing Matrix (Pure Cut + 5″ Pads)
| Pad | Material / Tech | Machine | Cut / Finish (10) | Typical Use | Optional Step 2 with Perfect Polish | Notes |
|---|---|---|---|---|---|---|
| Microfiber Cutting Pad | High-density microfiber | DA / Rotary | 9 / 4 | Heavy defects, oxidation, P1200–P1500 marks | Orange Polishing Pad (most paints) or Black Finishing Pad (soft/dark) | Fastest correction; clean pad often to maintain cut |
| One Step Microfiber Pad | Blended MF over foam | DA | 7 / 6 | Moderate defects; one-step leaning | (Optional) Orange Polishing Pad for extra clarity | Strong cut with better finish; time saver |
| Orange Polishing Pad | SmartCell™ foam | DA / Rotary | 5 / 8 | Light defects, post-compound refining | Black Finishing Pad for jeweling / max gloss | Lower heat, smooth wipe, consistent control |
| Black Finishing Pad | SmartCell™ foam | DA | 2 / 10 | Final finish, coating prep, soft/dark paints | — | Ultra-fine finishing; minimal cut |
DA = Dual Action.
How to Use Pure Cut (with Ethos Pads)
-
Pad & Machine
-
Start with the least aggressive pad that achieves your goal (see chart).
-
DA speeds: 3–5. Rotary: 600–1200 RPM on most paints.
-
-
Prime & Load
-
Microfiber: Light face prime the fibers, then add 3–4 pea-size drops.
-
Foam: Apply 3–4 pea-size drops spaced on the pad.
-
-
Work a 2′ × 2′ Section
-
Spread product, then make slow, overlapping passes with moderate pressure for 2–3 passes.
-
Keep the pad flat; maintain steady pad rotation (DA).
-
-
Refine the Pass
-
Clean the pad on the fly (pad brush/air), reload with 2–3 drops, then make a final no-pressure pass to improve clarity.
-
-
Wipe & Inspect
-
Remove residue with a clean microfiber. Check under proper lighting.
-
If faint haze remains, step down to Perfect Polish + Orange Polishing Pad (or Black Finishing Pad on soft/dark paints).
-
Pro Tips: Work on cool panels; don’t overload the pad; clean pads every 1–2 sections for consistent cut and finish.
Reviews
There are no reviews yet.